Our Products

ANCILLARY EQUIPMENT FOR PLASTIC PROCESSING MACHINERY
___

 

  • Gives U-Shape, D-Shape, Banana Shape, Hanger shape etc (Anyone at a time)
  • It can also accommodate other punch styles as well (Like TWO Finger Hole, THREE Finger Hole, etc..)

MATERIAL TO PROCESS :

  • LLDPE, LDPE, HDPE, HM
  • Non-Woven Fabric
  • Laminated Woven Fabric
  • Metalized laminated cardboard
  • Laminated Papers

WORKING STYLE :

  • It is designed with operation of mechanical and electrical process.
  • 2 HP 3 Phase motor will push the punch down to cut the Film.
  • Both side given push button for a safer operation. While an operator’s hands are safe.
  • Can cuts 50 nos of bags in one stroke.
  • Push Button will start the Action, while Auto Cut-off by Limit Switch with DOL Starter.
  • Automatic operation for electric motor, gives energy power saver and speedy Operation.
  • Side Adjustment and 500 X 500 X 25 mm Nylon Plates with Complete Accessories.
  • Vertical Granule Mixer is designed for Mixing Plastic Granule, Masterbatch, Recycled Granule, etc..
  • This Mixer not only Mix all material together but it also removes moisture from the material and make combination moisture free to process material in Extrusion.

FEATURES :

  • Operates with Lower AC motor only thus it has lower Electricity consumption and higher Production capacity
  • For 50 to 100 Kg Mixer, our Mixer is having 1 HP AC Motor
  • For 100 to 200 Kg Mixer, our Mixer is having 2 HP AC Motor
  • High Speed
  • High Efficiency
  • 24X7 Working Capacity Supports Large Scale Online Continuous Production
  • Lower Cycle Time
  • For 100 kg, Cycle time is around 10-15 min
  • For 50 kg, Cycle time is around 5-7 min
  • Material will pass from the shutter above the tray which is then again lifted by the screw, so double process to reduce moisture from the material
  • Heater Chamber is provided inside the drum which is connected to the Heater and Blower to remove the moisture from the material

MATERIAL TO PROCESS :

  • LDPE / LLDPE, HDPE / HM, PP, CPP, BOPP, NYLON, EVOH, EVA, etc
  • Masterbatch
  • Low Grade Material like Recycled Granule, Filler, etc

MIXER CAPACITY :

  • 100 Kg
  • 200 Kg

APPLICATION OF FINISHED PRODUCT :

  • Mechanical Parts : Bearing, Gears, Motors
  • Instruments : Panel Board, Name Plates, Precision Equipment
  • Hardware Tools : Drilling & cutting tools, Measuring Tools
  • Automobile ; Piston & Rings, Gears, Valves, Linea, Clutch, etc
  • Electronics Components : Resistors, Capacitors, IC, PCB, Keyboards, Switch, etc.

MECHANICAL PRINTING EQUIPMENT

  • Rotary Automatic Hot Marking Machine is specially designed for cPVC, uPVC Pipes during online Extrusion Process.

MATERIAL TO PROCESS :

  • cPVC Pipe
  • uPVC Pipe

PIPE OD RANGE :

  • 20 mm to 315 mm
  • 315 mm to 630 mm

FEATURES :

  • Automatic Speed Synchronization respect to speed of pipe Extrusion Machine
  • Specifically designed to mark in different color
  • Specifically designed to mark on all type of Rigid Pipes, PVC Section (Profile) during Extrusion Process
  • Wide range of Pipe OD / PVC Profile shape & size covered
  • Electronic Length Counter included
  • Can print continuously up to 1 Meter Length
  • Economically developed Equipment

LASER PRINTING EQUIPMENT

  • Our Fiber Laser is used to Mark / Engrave Characters, Logos, serial Numbers, Barcodes, 2D Codes, Complex Designs and Manufacturers Identification.

MATERIAL TO PROCESS :

  • Metals like SS, Brass, ALuminium, Mild Steel, Iron, etc..
  • Non-Metals like PVC, HDPE, PPR, ABS, Nylon, PES, etc..

MARKING SPEED :

  • High speed Marking available

TREATMENT WIDTH :

  • Narrow Width & Bigger width available depend on the requirements

FEATURES :

  • High frequency operation
  • High Speed
  • High Efficiency
  • 24X7 Working Capacity Supports Large Scale Online Continuous Production
  • Supports Versatile Data Type Support like Text, Serial Number, Batch Number, Date, etc
  • Linux based Operating System
  • DSP Control Board Ensures That It Takes Only 1μs To Complete The Operation And 10μs To Real Positioning
  • Stability With Quick Reaction Time And Smooth Operation
  • Support RS323, TCP/IP Communication, Photo Electric Sensors, Encoders And Other Peripheral Interface. Which Support Different Production Lines

APPLICATION OF FINISHED PRODUCT :

  • Mechanical Parts : Bearing, Gears, Motors
  • Instruments : Panel Board, Name Plates, Precision Equipment
  • Hardware Tools : Drilling & cutting tools, Measuring Tools
  • Automobile ; Piston & Rings, Gears, Valves, Linea, Clutch, etc
  • Electronics Components : Resistors, Capacitors, IC, PCB, Keyboards, Switch, etc.

 
  • Auto Hopper Loader is designed for Mixing Plastic Granule, Masterbatch, Recycled Granule, etc..
  • SS Hopper to avoid material contamination.
  • Hoppers are mainly used beside injection molding machines, extrusion machines or other machines.

FEATURES :

  • Vacuum & Material line located on stationary part canister, so ease in top lid open/close, easy for fix rigid piping.
  • Vacuum & Material line size can be change at any moment of time-just by changing the flange of an appropriate required size.
  • Suitable for output upto 25kg/hr. to 2000 kg/hr.
  • Loader volume size in 07 ltr/15 ltr. & 30 ltr. capacity.
  • Stainless Steel 20 mesh disc filter, easily service with no tools.
  • 25 micron paper filter will not allow dust to migrate to blower.
  • Stainless steel canister is designed for easy clean out.
  • All non ferrous material contact surfaces.
  • Pugged stainless steel discharge base with 60 cone section provides.
  • Large material outlet hole provide maximum material discharge in fewer seconds-reduces discharge time & material clogging.
  • Wide open flapper discharge valve eliminate material bridging.
  • PLC base user friendly control with audio alarm.
  • Ratio Loader pneumatically.
  • PU Pipe for conveying hot material.
  • SS Pipe for conveying material.
  • Cyclone Separator with Dust Collector.
  • Pneumatic line Cleaning arrangement.

MATERIAL TO PROCESS :

  • LDPE / LLDPE, HDPE / HM, PP, CPP, BOPP, NYLON, EVOH, EVA, etc
  • Masterbatch
  • Low Grade Material like Recycled Granule, Filler, etc

LOADING CAPACITY :

  • 25 kg/hr to 300 Kg/hr

 

MATERIAL TO PROCESS :

  • LLDPE, LDPE, HDPE, HM
  • PP, CPP, BOPP
  • Paper
  • Foil
  • Metalized laminated cardboard
  • PVC
  • Polyester sheet
  • Woven-sack bags (laminated / Un-laminated, reverse bags, paper, conductive / nonconductive duplex etc.)

APPLICATION OF FINISHED PRODUCT :

  • Printing
  • Coating & Laminating
  • Film Extrusion
  • Extrusion Coating
  • Narrow Web

SCOPE OF SUPPLY :

  • PLC based Control Panel
  • High voltage Transformer
  • Single Phase / Three Phase Input
  • Fix Type / Segmented Type Electrode
  • Dynamically balanced Rollers
  • Pneumatically operating Hand lever valve
  • Di-Electrical Silicon Sleeves
  • High speed Blower

TREATMENT WIDTH :

  • 600 mm to 3000 mm
  • Narrow Width & Bigger width available depend on the requirements

FEATURES :

  • High-frequency operation with IGBT construction
  • Easy selective treatment by segmented electrodes
  • Overload Trip for protection
  • Enclosed System for utmost safety
  • Enormous Capability
  • Reliable performance
  • Corona Treater Rollers covered with high dielectric grade silicone sleeves
  • Pneumatically actuated treating heads / Split Assembly for easy threading of the films.
  • Idler rollers at film entry & exit to ensure proper wrap angle of film with treater roller.
  • Easy Inline air gap adjustment with knobs provided externally on the ducts
  • S.S. Braided double dielectric sheathed high tension cable to ensure safety
  • Dynamically and statically balanced rollers.
  • Proximity switch for zero speed sensing & closed loop feedback for Auto watt density control.
  • Assembly open safety switch for human safety
  • Rigid cross members and electrode holding bars to ensure uniform and parallel air gaps

FEATURES :

  • The unit cleverly integrated advanced structural design with Innovative concept for reclaim trimmed film edge uninterruptedly within the system
  • Easy to handle plug and play operation.
  • Trim has been designed specifically for use with blown film/ air bubble plant / cast line to provide small, energy-efficient, non-obstructive recycling of edge trim. Its compact and ‘open’ construction allow for low maintenance, non-operator dependent and on-line operation.
  • Very Low Power System for Film / Liner Plant
  • No Need of Labors (Zero Labor Cost)
  • Maintenance Free & Compact Design
  • No Need to make Low Quality RP Granules
  • Material remain Next to Virgin Polymer, as it does not passes through any Heat / Water Cycle during Extrusion
  • Very Low Cost of Recycling
  • Closed Loop System

MATERIAL TO PROCESS :

  • LLDPE / LDPE
  • HDPE / HM
  • PP / CPP / BOPP

TRIM WIDTH :

  • 7 mm to 25 mm
  • 25 mm to 50 mm

TRIM THICKNESS :

  • 10 to 80 Micron

LINE SPEED :

  • up to 120 MPM
  • Trim Winder is an innovative concept which adds value to the process by rewinding the trim produced by converting machines. Like Slitting, Extrusion, Pouch Making and many more..

FEATURES :

  • Fully automatic & Programmable operations with latest technology
  • Easy to handle plug and play operation.
  • Gives Trims in reel form which required less storage space
  • Saving of Power up 60%
  • Reduce the noise pollution in print shop.
  • Reduce Labor Cost
  • Increases Cost sale trim
  • Can be easily attached with Slitter, Extrusion, and Pouch Making.
  • Reel weight up to 20Kg can be handled at a time.
  • Special Design Hi-Speed Machine.

MATERIAL TO PROCESS :

  • HDPE / HM
  • PP / CPP / BOPP
  • PET
  • Plain / Coated or Metalized LDPE

TRIM WIDTH :

  • 5 mm to 30 mm

TRIM THICKNESS :

  • 10 to 200 Micron

LINE SPEED :

  • 500 MPM & 1000 MPM

 

  • The Plastic waste scrap grinder machine is well equipped for every type of film and thin walled articles. With a high throughput and faster processing of film waste, it also consumes a lot less energy and is an economic version of our heavy duty grinders like sumo grinder. It is one of the most energy efficient waste grinding systems.
  • The plastic film / thin walled rigid waste scrap is fed from the throat at the top.
  • The material falls into the cutting chamber where the rotor (driven by an external motor and pulley system) has multiple blades on it.
  • The grinder body / chamber also has adjustable stationary blades. The distance between the rotating blades and these stationary blades can be varied (not during operation) according to different material types.
  • The material is cut at high speeds between these scissor cut blades.
  • Below this is a screen with fixed hole sizes which only lets material of a certain size through, preventing any uncut material from leaving the chamber.
  • This screen can be changed according to requirements.
  • The output material is ejected at the bottom which can be optionally fed directly into a conveyor or air tube.

MATERIAL TO PROCESS :

  • Jumbo Bags
  • Raffia bags
  • Injection / blow moulding articles
  • PVC / HDPE pipes
  • PET bottles
  • Jerrican / Jerrycans
  • PVC profile
  • HIPS sheets
  • Bucket scrap
  • Films (any plastic material type)

 

 
  • Our agglomerator Unit also know as plastic film compactor machine, film densifier machine And our agglomerator used for various other applications like material mixing machinery, asphalt mixing plant, construction machinery, mixing machinery, asphalt machinery, asphalt tank, hot recycling plant etc.

MATERIAL TO PROCESS :

  • Jumbo Bags
  • Raffia bags
  • Films (any plastic material type)

 

Contact Us: +91 7383852878

Company Address

Ahmedabad,
Gujarat, India.

E-mail

[email protected]
[email protected]

Phone Numbers

Mobile: +91 7383852878

Need help?