About Us
____

Vision

To make the universe believe us as the most passionate solution designer practicing ethical engineering while balancing humanity & nature for each individual associated with.

Our Products
____

Our Prime Installations
____

Plastic Film and Woven Sack Wastage Recycling Machine (FACEEX)
(SAUDI ARABIA)

• Build on shared ambition to lead the industry through consistent and efficient delivery of high quality products, has resulted in the delivery of RECYCLING LINE without AGGLOMERATOR.
• An Innovative concept of Recycling Plastic Film (Film Wastage, Printed Film, Start-Stop Wastage, Side Trim, etc.) without using Agglomerator.
• This Machine takes Film as input and convert into flakes and then force feeder to feed the material to recycle it into granules.
• Material : Suitable for LD, HD, HM, PP, BOPP, Mono-Multi Layer Film waste PP Raffia, Mono Filament, FIBC, LLDPE.
• Extruder size : 90 mm Vent Type
• Out-Put : 90 to 110 kg/hr. (For Plant Waste only)
• Connected Power : 83 KW (Approx.)

Bio-Degradable Material Processing Monolayer Blown Film Machine (UNOFLEX)
(VIETNAM)

• Bio-Degradable Film Manufacturing Machine was introduced on the basis to the subject of “Go Green and Eco Friendly” awareness to the Plastic Film production industry.
• A perfect blend of efficiency, reliability and flexibility (the universal screw design allows for a simple transition between Bio-Degradable to LDPE to HDPE production), our Degradable series of Blown Film extruders make excellent additions to any Blown Film Operation.
• Material : Suitable for 100% Bio-Degradable Material, LDPE, LLDPE, HDPE, HM Mono Layer Film
• Extruder size : 50 mm
• Film Width : 450 to 750 mm
• Out-Put : 70 to 80 kg/hr.
• Connected Power : 60 kW (Approx.)

Pipe Extrusion Die Head and Down Stream Equipment (HDPEEX)
(CARIBBEAN COUNTRY)

• Die Head which is compatible to cover wide pipe diameter & thickness range with Optimum flow properties over entire flow channel. Manufactured with considering optimized Back pressure allows a balance of compression & melt temperature control.
• The result is Excellent wall thickness control at a higher through-put rate and elimination of continuous spiral marks (ID to OD) allowing better mechanical properties of the pipe
• Material to Process : PVC
• Pipe Size Minimum : 20 mm & 1.2 mm Thickness
• Pipe Size Maximum : 110 mm & 3.7 mm Thickness
• Throughput Capacity : 250 kg/hr
• Connected Power : 10 kW

Plastic Waste Recycling Machine (PALLETEX)
(UGANDA)

• Our Classic Series Film Recycling Lines are specifically designed to process wide range of material like LDPE/ LLDPE, HDPE, HM, PP, material through same extruder and results into a finest cutting Pallets that is relatively high in clarity, glossy & Flexibility in terms of application.
• Energy efficient Extruder for higher production capacity with minimum Power consumption with Consistent Pallet Quality & Size  
• Material to Process : LDPE / LLDPE, HDPE / HM, PP, Non-Woven Film, Injection Molding articles, Monofilament Yarns & Fabrics, etc 
• Extruder : 90 mm 
• Output Capacity : 120 kg/hr for LDPE, 110 kg/hr for LDPE, 100 kg/hr for PP

Lollipop Stick Making Machine 
(UGANDA)

• A Complete Solution to manufacture wide range OD of Stick for catering different market. With this line one can manufacture Lollipop Stick, Swab Stick & Drinking Straw, With small Extruder of 50 mm and 11 kW Main Motor, Excellent output capacity with lowest Thickness variation with better Mechanical property.
• Material to Process: PP / HDPE
• Stick Size: 2 to 4 mm
• Stick Thickness: 0.2 to 0.75 mm
• Production capacity: 30 kg/hr OR 800 to 900 Sticks/minute
• Application of the Stick: Double Notched Lollipop Stick / Cotton Swab Stick

Pipe Property Testing Equipment
(UAE)

• Our Hydraulic Press is used for clamping Cone Type End Caps for Pressure Testing Method. Clamping force is around 20 tons.
• This unit is Vertically Heavy duty structure, Base monitoring & Power pack Unit. This unit is suitable for 200 mm to 1200 mm Pipe Dia range.
• End caps are developed & manufactured to fulfill highest requirements with respect to handle & quality. Result is easy-to-mount, durable & closures that reliably seal the test sample. All available for standard and customized dimensions.
• End Cap Material : SS
• End Cap Size : 63, 75, 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315, 400, 450 & 500 mm

Film Property Testing Equipment
(SAUDI ARABIA)

• Wide range of Equipment to choose from for identifying Various Property of Plastic Film.
• One stop solution to have wide range of Equipment to test various film property, which gives precise result.
• Scope of Supply includes : Fully Automatic Melt Flow indexer, Universal Tensile Testing Machine, Co-efficient Of Friction, Heat Seal Tester, Opacity Tester, Muffle Furnace, Digital density with micro balance, Moisture analyzer, Color Matching Cabinet, Film Shrinkage Tester.

Our Works
____

Film Treatment Unit Corona Treater
(MIDDLE EAST COUNTRIES / AFRICA)

• Corona Treatment Systems are widely used plastic packaging industries for increasing surface tension of plastic films before printing and lamination.
• Our customer has shown trust on us and placed 2 nos. of Corona Treatment Unit to use it on their existing ABA & PPTQ Blown Film Machine.
• Scope of Supply Includes : PLC based Control Panel, High voltage Transformer, Single Phase Input, Fix Type Electrode, Dynamically balanced Rollers, Pneumatically operating Hand lever valve, Di-Electrical Silicon Sleeves, High speed Blower
• Material : Suitable for LD, LLD, HD, HM, PP, BOPP, Mono-Multi Layer Film.
• Film Width : up to 1000 mm
• Film Thickness : 10 to 100 Micron

Trim Recycling and Feeding Unit
(INDIA / AFRICA)

• A unique concept of Converting Trimmed film (Excess Film) into Flakes and feed into Extruder.
• A complete close loop system that will cleverly integrated advanced structural design with Innovative concept for reclaim trimmed film edge uninterruptedly within the system.
• The process starting from edge trim feeding, cutting and feeding in the extruder, all in one complete process promised to save labor cost, power consumption and process time.
• Material : Suitable for LD, LLD, HD, HM, PP, BOPP, Mono-Multi Layer Film.
• Trim Width : 7 mm to 25 mm
• Trim Thickness : 6 to 70 Micron
• Out-Put : 25 to 40 kg/hr.
• Connected Power : 6 KW (Approx.)

Offline Punching Machine
(MIDDLE EAST COUNTRY / AFRICA)

• A standalone unit which is a combination of Electrical & Mechanical process to make various Punch in wide range of Plastic Film.
• Push Button will start the Action, while Auto Cut-off by Limit Switch with DOL Starter. Automatic operation for electric motor, gives energy power saver and speedy Operation.
• Side Adjustment and 500 X 500 X 25 mm Nylon Plates with Complete Accessories.
• Material : Suitable for HDPE, PP, LDPE, Woven sack, Non-woven Fabric.
• Punches : U-Shape, D-Shape, Banana Shape, Hanger shape, Twi Finger Hole, Three Finger Hole, etc.
• Out-put : 50 to 60 Bags per Strokes.
• Connected Power : 2 KW

Rubber Rollers and Other Spares
(AFRICA)

• Rollers are basic & Primary accessory for Web Process Control. Even surface, appropriate material of coating according to the application, uniform hardness, along with precision workmanship are the key features of our Rollers. We select the Roller Type and Coating material depend upon customer’s application and the web material.
• Type of Rollers : Printing Furnishing Rollers, Lamination Rollers (Extrusion, Solvent less / Solvent base Lamination), Film Plant Rollers
• Scope of Supply Includes : 1000 mm and 1280 mm Length Gravure Printing machine Synthetic Rubber Roller, 1280 mm Lamination Machine Synthetic rubber Coating Roller for working at 150 °C, Doctor Blades
• Number of Rollers : 13 Nos.

Range of Spare parts for Blown Film Machine, Lamination Machine, Printing Machine
(AFRICA)

• Wide Range of Mechanical Assembly, Electrical Items & Pneumatic Items Dispatched to Customer for regular maintenance of their various Plastic Processing Machineries. Prompt feedback and excellent product gives us chance to do repeat business with them. We have earn trust of the customer that they give us product photo and request us to deliver it without asking for Commercial details.
• Scope of Supply Includes : Mechanical Assembly for Lamination & Printing Assembly of European Machine, Range of Electrical Items of Lamination, Printing & Blown Film Machine and Range of Pneumatic Items for Lamination & Printing Machine.

Pigments and Range of Spare parts for Pipe Extrusion Machine
(CARIBBEAN COUNTRY)

• Yellow & Robin Blue Pigments to meet their Color expectation and ease of processing with other powder form material. Apart from Pigments, we also have supplied List of Electrical Items, List of Pneumatic Items and Fittings for their Pipe Extrusion Machinery. Clear Communication, Wide Product range of product options, Prompt Delivery makes us their first choice to repeat business with them.
• Scope of Supply Includes : Yellow Pigments, Robin Blue Pigments, Wide Range of Electrical Items for Pipe Extrusion Machinery, Wide Range of Pneumatic Items for Pipe Extrusion Machinery.