Our Products

PVC Pipe Extruder Plant (PVCEX)
___

 

  • Pipe Extrusion products are manufactured in accordance with the predefined industry. Backed by the expertise of an adept team, we are one of the leading manufacturers and suppliers of Pipe Extrusion Machinery.
  • For traditional production lines for PVC, PE, PP (mono or multilayer) or special custom made solutions, Infinite India provides a specialized project management unit equipped to deal with a wide range of requests.
  • Always keeping in mind the economic optimization of the plant and production, the company can give assistance at any step of the project; from the feasibility study and machinery planning to the start-up and after sales support.

PVC Extruder Range :

  • 52 mm to 90 mm with a wide range of L:D Ratio
  • Output Ranges from 90 Kg/hr to 450 Kg/hr

Die Head :

  • 20 mm to 630 mm
  • Single Strand & Twin Strand

Vacuum Tank :

  • 110 mm to 630 mm
  • MS / SS Material to Choose

Haul-Off :

  • 20 mm to 630 mm
  • 2 Belt, 4 Belts, 6 Belts

Cutter :

  • Upstroke Cutter, Planetary Cutter
  • We manufacture standard & Customized Twin Screw and Barrels, starting from 52 mm to 90 mm Dia. Our Screw-barrels are manufactured according to present market needs like processing of high dosage of filler, processing of ISI grade application and processing of lower dosage of filler. We follow all standard manufacturing procedure and adhere all standard norms of manufacturing.

TUNGSTEN CARBIDE COATING :

  • Coating of Tungsten Carbide will enhance the life of Screw against wear and tear over Nitrided screws.
  • Wear & tear are in terms of abrasion and corrosion resistance under high temperature and pressure.
  • In case of processing high amount of fillers, loading in PVC Pipe or Profile, we are processing coating on the surface of screw of having deepness of around 0.47 to 0.5 mm.
  • Tungsten coating will increase life span of the screw and also more helpful to achieve longer life in commercial PVC Pipe & Profile.

HSS SLEEVE FITTED BARREL :

  • HSS Sleeve provides extra life to Barrel against wear & tear over Nitrided Barrel.
  • Thickness of such sleeve is from 5 – 6 mm and throughout hardness of the sleeve is from 62 – 64 HRC.
  • HSS Sleeve fitted Barrel are mainly used when hard material processed by Plastifying system.

KEY FEATURES OF TWIN SCREW BARREL :

  • Longer Service life due to Consistent Hardness, Tungsten Carbide Coating and HSS Sleeve Fitting Barrel.
  • Made from EN41B (ISO Laboratory certificate will be provided if needed).
  • In Depth hardness up to 0.5 mm.
  • Highly Polished and Buffed which enhance the flow of the material.
  • Renowned as a leading pipe head manufacturer for PVC and HDPE pipes, Infinite India offers a pipe heads generation characterized by three different design solutions.
  • BASIC, based on a helical spiral design for monolayer and multilayer pipes. ADVANCE, a cutting-edge technology made of radial spiral modules for multilayer pipes (up to 3 layers) for hot water application and specific product requirements.
  • HYBRID, the hybrid system (helical + radial) for the extrusion of medium and large multilayer district heating pipes.

FEATURES :

  • Compatibility to cover wide pipe diameter and thickness range.
  • Lesser change-over time.
  • Optimum flow properties over entire flow channel.
  • Ideal purging time profile with selective temperature control on the sensitive material.
  • Facilitates Optimum output.
  • Excellent wall thickness control at a higher through-put rate.
  • Elimination of continuous spiral marks (ID to OD) allowing better mechanical properties of the pipe.
  • Optimized back pressure allows a balance of compression & melt temperature control.
  • Vacuum sizing tanks are used to provide stable and constant value of vacuum for the precise sizing of tube and profile extrusions. Being composed of stainless steel, they provide a high corrosion resistance. These tanks are used in a closed water circuit through an efficient heat exchanger that minimizes the water consumption.
  • The performance of an extrusion line gains definite advantages from the suitable design and correct use of tanks and calibrators.
  • Our tanks are reliable tools for an accurate and quality production. Skill and knowledge for sleeves design solutions ensure round pipes with excellent surface and lower overweight.
  • Dual or single vacuum chamber sizing tanks for pipes with a diameter range of between 10 to 500 mm, in single or dual strand.
  • The tanks are made of stainless steel and are fixed to a steel base, equipped with independent automatic or manual devices for longitudinal and transversal position adjustment on the extrusion line.
  • The machines are equipped with a water system with thermostatic and valve controls to reduce the amount of water in circulation and keep the cooling temperature constant.

TECHNICAL FEATURES :

  • Inspection hatches with toughened glass
  • Inlet and outlet watertight seal around the pipe
  • Simple height adjustment
  • Filter with bypass to keep the water clean
  • Special devices for longitudinal and transversal position adjustment

ADVANTAGES :

  • Low water consumption
  • Strong, sturdy frame
  • Top-quality materials used in construction
  • Reliability and maximum process control
  • Cooling tanks for a range of pipes of 10 mm to 630 mm in diameter and 6 to 9 meters in length. Water collection tank and spray sprinklers support pipes both made of stainless steel. A pump transports the circulating water to the spray sprinklers, assembled on stainless steel bars, with an adjustable spray angle.
  • Spray water is recycled and cleaned through a separation filter, thus preventing clogging of the sprinklers.
  • The inspection hatches, made of stainless steel, are located on the operator side.
  • Stainless steel cooling tanks for PE and PP corrugated pipes ranging between 10 and 630 mm diameter. Tanks designed to provide constant pipe cooling and to avoid any deformation during extrusion.
  • The cooling capacity of the closed circuit water system allows a higher extrusion speed to be used and provides greater control over the tolerances of the diameters. A ventilation system cleans and dries the pipe as it exits the cooling chamber.

TECHNICAL FEATURES :

  • Simple height adjustment
  • Strong, sturdy frame
  • Top quality materials used in construction
  • Filter with bypass keeps water clean
  • Machine with closed loop circuit and heat exchanger

ADVANTAGES :

  • Inspection hatches made of toughened glass
  • Inlet and outlet watertight seal around the pipe
  • Low water consumption
  • Leading brand components
  • Reliability and maximum process control
  • Facilitate the extrusion process start-up (dual chamber version)
  • Reduce initial waste and downtime (dual chamber version)
  • Allow sizing of non-circular profiles (dual chamber version)
  • Optimized positioning of spray nozzles- Intensive cooling even at higher speeds
  • Haul-offs for pulling solid-wall pipes in ABS, PVC, PE and PP.

FEATURES AND ADVANTAGES :

  • Independently driven caterpillars using vector motors. They allow a constant pulling power. Furthermore, they reduce energy waste and the number of moving parts subject to maintenance.
  • Long caterpillar contact length assures a good grip on the pipe and provides considerable pulling power.
  • Caterpillars bow profile. The shape reduces stretching and wear of the caterpillars, thus prolonging the life of the machine.
  • Pivoted upper caterpillars feature a pipe-crushing control system.
  • Motorized positioning of lower caterpillars that can be adjusted according to the diameter.
  • Chain conveyors with neutral rubber pads on chains that do not mark the pipe.
  • Multi Belt – 2/4/6 belts- ovality free pipes
  • Pneumatic clamping – Ease in set up and efficient traction.
  • Mechanical power distribution eliminated – Ease of maintenance.
  • Equipped with AC Asynchronous Servo Geared Motor for each caterpillar and common servo drive.
  • Precise control and synchronization.
  • Minimum speed range lowered significantly.
  • High pulling force at low speed

TECHNICAL FEATURES :

  • Cutting process synchronized with pipe movement.
  • For in-line or off-line production.
  • Disks or planetary knife cutting techniques.
  • Shearing cuts for copper pipes with closing of both ends Cutting device automatically finds the corrugated pipe groove center.

ADVANTAGES :

  • Simultaneous cut and chamfer
  • High-speed and accurate cutting
  • Energy saving
  • Versatile units customizable according to the application field
  • Strong, sturdy frame
  • A system that uses a revolutionary way to cut and chamfer plastic pipes without production of chips and dust, eliminating completely any inconvenience arising from creation of dust material when cutting and/or chamfering. Problems such as collection, storage and removal are completely eliminated.
  • Less maintenance needs due to the complete absence of dust/swarf contaminants.
  • Universal chamfer unit nearly indestructible: total cost of ownership drastically reduced thanks to the absence of worn cutters needing resharpening.
  • Low noise level of machine (no fans and cutting tools in motion)
  • Superior quality of production in terms of roughness and surface regularity

Work In progress

Contact Us: +91 7383852878

Company Address

Ahmedabad,
Gujarat, India.

E-mail

[email protected]
[email protected]

Phone Numbers

Mobile: +91 7383852878

Need help?